Cleaning Out The Garage...

I did not take a picture before...

from a distance

there would not have been much of a difference in the after.

This project was primarily about applying epoxy to the garage floor.

We keep both vehicles in the garage, 

so it is always pretty open and clean, except for the floor itself.

The first step...
everything came out of the garage or went on top of the work bench.

Note to self, we have enough Home Depot buckets.

We have applied epoxy in the past, it was pealing,

so the hubs sanded down those spots and patched them.

After that, we applied the epoxy with brushes up against the entire perimeter. 

I helped with that but not too much, and the hubs had to fix my "hick-ups" on the white door.

Then the epoxy gets rolled on with that big roller...

my job, which I chose to accept, was to put the sprinkles over the wet epoxy.

These sprinkles, so the floor does not have a flat finish,

doesn't it look great!!

Here it is all done, the white door leads to the back yard,

the brown door in to the house.

There were a lot more steps than I mentioned and this was a lot of work for the hubs.

It is a Spring project we do every couple of years...

and this was the year it needed to be done!

We are hoping it will not peel again - time will tell!